The problem is that deciding whether to repair or replace your refrigerator can be a tough call. If you’re thinking of buying a new one, it can cost anywhere from $1500 to $12000 for higher-end models, and even used ones go for around $200 to $400 on average. On the other hand, repairing your refrigerator means you’ll need to consider whether the cost of repair (which includes buying or sourcing new parts and the repairman’s fees) is worth it. 

Aside from the expense, you’ll also need to think about other factors such as delivery fees, the hassle of finding suitable parts, and how long you can go without a working refrigerator!

If you’re stuck between deciding whether to replace or repair your faulty refrigerator, this guide will help you weigh the pros and cons of each option and make the best decision for your situation.

Factors to Consider

Model

More complex units are costlier to both repair and replace. Refrigerators with a lot of features have more moving parts, which means you’ll need to spend more if these break down. For example, refrigerators with ice and water dispensers might be more convenient since you can easily have access to potable drinking water but these units can also have leaking problems you won’t find with basic refrigerator models.

Simply put, basic refrigerators have easier upkeep and better longevity compared to those models with a lot of bells and whistles. Remember those old Nokia phones? Compared to a modern-day iPhone, they don’t offer much outside of being able to call, text, and run a few simple games, but Nokia phones could last for days on a single charge and you didn’t have to worry about your screen cracking after accidentally sitting on it. 

Aside from your refrigerator’s model, its configuration can also play a part when it comes to longevity and sturdiness. A basic single-door configuration typically lasts the longest without issues as long as you provide regular maintenance. Bottom-freezer configurations can show issues as early as their first year in use, while double-door refrigerators commonly show problems after about five years of use. 

Age of the refrigerator

A refrigerator’s age is a key factor in deciding whether you should repair or replace it. Modern refrigerators are built to last around 10-15 years, but some factors can considerably shorten a refrigerator’s lifespan such as overloading the shelves, neglecting regular and seasonal maintenance, and not reading the owner’s manual. Even small things like placing hot items inside or slamming the doors closed can have significant negative impacts on your refrigerator’s lifespan. 

Here is a great guide you can use to determine whether your refrigerator is old enough to replace:

• Less than 5 years old: Repairing the refrigerator is likely the more economical option, especially if the repair cost is less than half the price of a new one. Generally, the issues are minimal and easy to tackle such as the fan wearing out or the temperature sensor breaking down. In these cases, the only major cost you’ll need to consider is the contractor’s fees since small refrigerator parts only cost around a few dollars.
• 5-10 years old: This is probably where you’ll have the most trouble trying to decide whether to replace your refrigerator or have it repaired. You should consider the cost of repair versus the remaining lifespan of the refrigerator. If your refrigerator’s age falls on the lower end of the spectrum (five to seven years), it still falls under the average lifespan of modern refrigerators and it will still work well even if you simply get it repaired. However, if the repair is expensive and the refrigerator is nearing the end of its lifespan (closer to the 10-year mark), replacing it might be more sensible since there is a high likelihood that the major and more expensive parts of your refrigerator have also been worn down.
• Over 10 years old: Replacing the refrigerator is often the best option, especially if your refrigerator breaks down regularly. This is a sign that the major parts of your refrigerator such as your compressor, condenser, or evaporator is already on the verge of giving out. Repairing your refrigerator won’t be an economical choice at this point; there’s no sense in replacing one major component if the others are still in danger of breaking down at any moment!

Severity of the Problem

While refrigerators are built to last, it’s rare for them to go through their entire lifespan without at least one issue or two. In most cases, these issues are minor and won’t require replacement, especially if you have only had your refrigerator for a few years. 

One of the most common refrigerator problems that manifest early relates to ice and water dispensers. Issues like the ice not dispensing properly or your water coming out with an unpleasant smell are signs that you need to clean your refrigerator system or that there is a broken hose. 

Other minor issues may include:

• Frost buildup (particularly in no-frost models)
• Broken thermostat
• Clogged drain lines
• Faulty lighting
• Fan malfunction
• Skewed door alignment
• Cracked or broken gaskets or seals

Major problems, however, are a good indicator that replacing your refrigerator is a more practical and economical option. Any issues concerning major parts such as the compressor or condenser can lead to expensive repairs, and these repairs can cost almost as much as a new unit! If you encounter any of the problems listed below, it might be time to consider replacing your refrigerator.

• Frequent food spoilage due to refrigerator not holding constant temperatures
• Repeated water leaking even after checking drain lines
• Excessive condensation
• Overheating (it’s normal for the exterior of your refrigerator to feel warm when it’s powered on but if the temperature is high enough that it is painful to the touch, you have a problem)
• Excessive ice buildup in the freezer portion

Cost

When deciding between repairing and replacing a faulty refrigerator, the cost is the most significant factor to consider. After determining the problem, you’ll need to consider the cost of parts and labor versus the cost of acquiring a new unit. Don’t forget to include the cost of delivery and installation as well!

You can compare prices for either repair or replacement by getting quotes from qualified appliance repair technicians.

Warranty

Checking your refrigerator’s warranty can help save you big bucks! Generally, most warranties are valid for at least one year from the original purchase date but do yourself a favor and look for your refrigerator’s warranty. Some companies offer a longer warranty period. Samsung, for instance, offers a complete warranty for all parts, repairs, and labor for the first year, specific parts replacement for five years, and compressor replacement for ten years. Miele offers a one-year full warranty with the option to extend the warranty to two years if you opt for the additional coverage within 60 days of your purchase. 

You should also check the terms. Some warranties cover both parts and labor costs while others only cover specific parts (also known as a limited warranty). In addition, there could be clauses that might render your warranty void such as attempting repairs or replacements without the aid of a licensed technician. 

Aside from checking the terms, you should also be familiar with the different kinds of warranty your refrigerator might have. For example, some companies offer a compressor warranty which is separate from the warranty for the refrigerator itself. Since a compressor is an integral component for cooling, compressor warranties often have a longer duration than the refrigerator warranty. 

The Bottom Line

The best thing to do when trying to decide between replacing and repairing your refrigerator is to weigh the pros and cons of each option carefully. You should consider all the factors involved, including the age of your refrigerator, the severity of the problem, the cost of repair versus replacement, and, most importantly, your budget!

Ultimately, the decision of whether to repair or replace your refrigerator is a significant decision that should be made with a long-term goal in mind. Sure, you might save a couple of bucks now if you choose to replace faulty parts on an older refrigerator model, but you should consider what it would cost if your food spoils or if the unit breaks down shortly after. You’ll likely end up spending double the amount since you’ll need to replace your refrigerator.

We understand that choosing between repairing a faulty refrigerator and buying a new one is not always an easy decision to make. That’s why our experts here at Pros Fix Appliances are here to help! Our great staff has years of experience in dealing with refrigerator issues and we are happy to guide you through the process. Give us a call today and let us help you decide the best option for your needs.

Why is Seasonal Maintenance Important?

Making sure that your refrigerator is running in tip-top shape involves more than snapping on a pair of rubber gloves and wiping down the insides. Proper seasonal maintenance involves routine checkups from licensed professionals to ensure that all the electrical components are working properly. Never forget that your refrigerator has a ton of small electrical parts and if even just one of them stops functioning, the whole appliance can grind to a halt.

Seasonal maintenance can also involve factors like the temperature of the weather and increased usage. During the summer, for example, soaring temperatures mean that even a single hour of downtime can result in all the food in your refrigerator going to waste. When the holidays come around, many of your activities are likely going to revolve around food, so you want to make sure that your refrigerator can keep up with the additional demand.

Lastly, keep in mind that your refrigerator is an investment! Putting in a little work and money now to provide proper maintenance can save you a lot of headaches and pricey repair bills in the future.

 Five Reasons to Provide Seasonal Maintenance 

• Wasted Food Items

The most obvious problem is your food going bad, from frozen goods to leftovers. When this happens, you’ll need to worry about three things: the cost of replacing the food, the cost of repairing your refrigerator, AND the dirty, stinky job of tossing out all the spoiled food!

• Ensuring Food Safety

Improper cooling and storage is the number one reported cause of foodborne illnesses in the United States. When your refrigerator isn’t cooling properly, it’s more than possible that your food turns bad even if the interior feels cold, especially when it comes to leftovers. Cooked food should be kept at or below 40°F, and most homeowners won’t really have a way to measure the interior of their refrigerator. If your refrigerator’s cooling system is malfunctioning, there is a higher chance for bacteria to grow and you can end up eating unsafe food. 

• Personal and Professional Disruptions

Whether you’re using your refrigerator at home or for a business, a broken refrigerator often means a significant disruption in your daily operations. It’s difficult to plan a meal when you need to worry about storing raw ingredients or leftover food, and no food business can function normally if their refrigerator breaks. Either way, a busted refrigerator results in a loss of time and money. 

• Energy Loss

A dirty or malfunctioning refrigerator needs to work harder to maintain the proper temperature. When your refrigerator’s coils are clogged, it takes the unit a lot longer to cool. If the heating tube is faulty, the defrost cycle might not work and you’ll end up with blocked vents. Whatever the case, you can expect higher electricity bills if your refrigerator isn’t working properly. 

• Shorter Lifespan

According to the United States Department of Energy, the average modern refrigerator is designed to last approximately 12 years. However, if you do not apply proper seasonal maintenance, you’ll notice problems popping up in your unit in as early as three or four years of use. Ignoring the small problems early on can even cut the lifespan of your refrigerator by as much as half. 

Eight Easy Ways to Provide Seasonal Maintenance for Your Refrigerator

1.  Thoroughly Clean and Sanitize the Interior and Exterior

A clean refrigerator is a happy refrigerator! Cleaning your refrigerator is as simple as taking a fresh and soft absorbent cloth and wiping down the accumulated dirt on the exterior, then using a mild detergent and warm water to wipe down the interior shelves and surfaces. Avoid using harsh chemicals that can damage the interior or leave unwanted odors.

For those hard-to-reach spaces, use a soft-bristled brush to remove grime and gunk. Make sure to get into those often-neglected parts such as the ceiling and floor of your refrigerator.

2. Check the Temperature

For optimum performance, set your refrigerator’s temperature setting at 35°F; anything below this threshold can accidentally cause your food to freeze and anything higher than 40°F can allow bacteria and mold to grow. You can invest in a digital thermometer to ensure that your unit is functioning properly and holding the right temperature.

In line with the temperature, you can also strategically place your food items inside. Cold air comes from the vent near the back of your refrigerator, so it tends to be the coldest area. Put perishable items and meats near the back and place fruits and vegetables in the front to prevent them from freezing.

<iframe sandbox=”allow-popups allow-scripts allow-modals allow-forms allow-same-origin” style=”width:120px;height:240px;” marginwidth=”0″ marginheight=”0″ scrolling=”no” frameborder=”0″ src=”//ws-na.amazon-adsystem.com/widgets/q?ServiceVersion=20070822&OneJS=1&Operation=GetAdHtml&MarketPlace=US&source=ss&ref=as_ss_li_til&ad_type=product_link&tracking_id=8666967767-20&language=en_US&marketplace=amazon&region=US&placement=B00DMI632G&asins=B00DMI632G&linkId=41224a1860c509399bc32fd84ae17cab&show_border=true&link_opens_in_new_window=true”></iframe>

3. Inspect the Seals

Always check your refrigerator’s seal as they keep the cold air inside. Refrigerator seals are often one of the first components to break since they can be damaged through moisture buildup or if someone closes the door a little too forcefully.

Look for any signs of damage including cracks, tears, or breaks. If you find any damaged seals, make sure to replace them as soon as possible, and if your budget allows it, opt for purchasing original door seals to ensure that they fit correctly.

There are times when the damage to door seals isn’t obvious, such as when the gasket along the door rim becomes deformed. Again, purchasing a digital thermometer for your refrigerator can help immensely because you’ll notice that the interior temperature isn’t holding where it is supposed to be. 

4. Clear and Clean the Coils

There are two sets of coils that you need to maintain: an evaporator coil inside your refrigerator that absorbs heat and a condenser coil outside that expels the heat. These coils can get covered in dirt and grime, resulting in your refrigerator’s compressor working harder to maintain the unit’s temperature. Over time, the strain can cause your compressor to fail and lead to an expensive replacement job. 

Luckily, you can keep your coils clean using these easy steps.

Gather the necessary tools and materials:

• Vacuum cleaner with a brush attachment
• Soft-bristled brush or coil cleaning brush
• Compressed air (optional)
• Dust mask (optional)

Preparation:

1. Unplug the refrigerator or turn off the circuit breaker. This is crucial to prevent electrical hazards while working on the appliance.
2. Locate the condenser coils. The condenser coils are typically found at the back or bottom of the refrigerator, behind a protective grille or panel.
3. Move the refrigerator away from the wall. This will provide you with enough space to access the coils comfortably.

Cleaning the coils:

1. Remove the protective grill or panel. This will expose the condenser coils for easy cleaning.
2. Use a vacuum cleaner with a brush attachment to gently vacuum the coils. Start from the front and work your way back, removing dust, dirt, and debris.
3. For stubborn dirt or hard-to-reach areas, use a soft-bristled brush or a coil cleaning brush. Gently brush the coils to loosen any remaining dirt.
4. If you have compressed air, you can use it to blow away any remaining dust or debris. Be careful not to blast the coils too forcefully, as this could damage them.
5. Once the coils are clean, replace the protective grille or panel.
6. Move the refrigerator back to its original position.
7. Plug in the refrigerator or turn on the circuit breaker.

Additional tips:

• Clean the condenser coils at least once a year, or more often if your refrigerator is in a dusty environment.
• If you have pets that shed fur, it’s important to clean the coils more frequently.

1. Check the Fan and Motor

The surest way to know whether your refrigerator’s fan and motor are having problems is when you either hear strange noises coming from your unit or if you feel a significant and prolonged increase in the interior temperature. These signs mean that either your fan or motor isn’t functioning properly or the cold air isn’t circulating inside your refrigerator.

If you hear a whirring or clicking sound from your fan, it’s likely an issue with the blades. Over time, the blades can misalign or distort, or there is a buildup of ice around the fan that the blades are striking against. Replace broken or faulty fans as soon as possible.

2. Clear and Clean the Filters and Vents

If you notice a funky smell coming from your refrigerator even after wiping down the interior, the filters and vents may be dirty and need to be cleaned. Before you wipe them down, unplug your unit to prevent electrical shock. Look for the vents (these are typically located at the back or the bottom front of your refrigerator) and remove the vent cover. Use a soft brush, a wet cloth, or a vacuum cleaner to remove dust and debris from the area. 

3. Keep Your Refrigerator Full

We’re not saying that you should cram as much food as you can inside your refrigerator, but keeping it full reduces energy use and helps keep your appliance running in the best shape! Stocking your freezer and your refrigerator reduces the amount of work your compressor needs to maintain the optimum temperature inside. As a rule of thumb, keeping your refrigerator and freezer about ¾ full works best. 

4. Keep Your Drip Pan Clean and Empty

One often-overlooked component of many modern refrigerators is the drip pan. Since many units have a “no-frost” mode, a lot of owners neglect checking the drip pan but these refrigerators still produce frost. When the frost melts, the water flows through a drainage system and collects in a shallow pan at the bottom of the refrigerator.

 Check your user manual for instructions on how to remove the drop pan. Clean and sanitize the drip pan at least once every three to four months to prevent bacterial growth and unpleasant odors. You should also check whether the drainage hole is clear; pet hair and dust often clog this outlet. 

The Bottom Line

If you provide seasonal maintenance for your refrigerator, you can expect years of great service from your appliance! It might seem like a lot of work at first glance, but all of the aforementioned tasks only add around a couple of hours of cleaning and routine checkups throughout the year. Think of it as putting a little bit of love and care and getting a whole lot in return. 

Taking proactive steps to care for your refrigerator saves you money, time, and effort in the long run. When you don’t provide seasonal maintenance for your refrigerator, it’s often the small problems you could have spotted early on and fixed that lead to expensive repairs and replacements. By making seasonal maintenance a regular part of your appliance care routine, you can enjoy a cleaner, cheaper, and more functional living space.

So, what are you waiting for? Roll up your sleeves and give your refrigerator the TLC it deserves today!

Models we repair:

WRS: Side-by-Side Refrigerators
WRF: French Door Refrigerators
WRX: Four-Door Refrigerators (French door with separate drawers)
WRB: Bottom Mount Refrigerators
WRT: Top Freezer Refrigerators
WML: Bottom Freezer Refrigerators with drawer
WMC: Compact Refrigerators

Not Cooling

One of the most common problems is when the fridge fails to cool properly. This could be due to various issues, such as a faulty compressor, condenser, evaporator fan, or a refrigerant leak.

Freezer Not Freezing

If the freezer isn’t reaching the desired freezing temperature, it could be caused by a faulty defrost system, temperature control, or compressor.

Leaking Water

Water leaking inside or outside the refrigerator can be caused by a clogged defrost drain, faulty water inlet valve, or damaged water lines.

Excessive Frost Buildup

Excess frost inside the freezer may indicate an issue with the defrost system or door gaskets not sealing properly.

Strange Noises

Unusual noises like clicking, buzzing, or rattling might indicate problems with the fan motors, compressor, or other components.

Door Seal Problems

If the door gaskets are worn out or damaged, the fridge may lose its ability to maintain proper temperatures.

Ice Maker Malfunctions

Issues with the ice maker can lead to no ice production, small ice cubes, or ice dispenser problems.

Dispenser Problems

If the water or ice dispenser is not working correctly, it could be due to faulty control boards, switches, or motors.

Fridge Cycling On/Off Frequently

Rapid cycling on and off might indicate issues with the temperature controls, compressor, or thermostat.

Control Board Failure

The electronic control board is responsible for regulating various functions, and if it fails, it can lead to various problems.

Some errors may be:

Error Code: PO, P0, or “Replace Filter”

Error Condition: The refrigerator’s water filter needs to be replaced.
Repair or Check: Replace the water filter following the manufacturer’s guidelines.

Parts Needed: Water filter.

Error Code: CL or “CLear”

Error Condition: The control panel is locked, and the buttons are unresponsive.
Repair or Check: To clear the error, press and hold the “Lock” or “Control Lock” button for a few seconds until the control panel unlocks.

Parts Needed: None.

Error Code: LO or “Off”

Error Condition: The refrigerator has been set to the “Sabbath Mode” or “Demo Mode,” and the cooling functions are disabled.
Repair or Check: To remove the error and resume normal operation, press and hold the “Sabbath Mode” or “Demo Mode” button for several seconds until the mode is deactivated.

Parts Needed: None.

Error Code: HRS, HR, HS, or “HRS/HR/HS”

Error Condition: The refrigerator is in “Showroom Mode” or “Demo Mode,” and the cooling functions are disabled.
Repair or Check: To exit the demo mode and restore normal operation, locate the “Showroom Mode” or “Demo Mode” setting in the user manual and follow the instructions to turn it off.

Parts Needed: None.

Error Code: F0, F1, F2, etc.

Error Condition: These alphanumeric codes typically represent a fault in the refrigerator’s electronic control board or other electrical components.
Repair or Check: Unplug the refrigerator for a few minutes and then plug it back in to reset the control board. If the error persists, consult the refrigerator’s user manual or contact Whirlpool customer support for further assistance.

Parts Needed: Electronic control board.

Error Code: E0 or “EO”

Error Condition: The refrigerator’s display control board has a communication error or malfunction.
Repair or Check: Unplug the refrigerator for a few minutes and then plug it back in to reset the control board. If the error persists, it might indicate a faulty control board that requires replacement.

Parts Needed: Electronic control board.

Error Code: E1 or “E2”

Error Condition: The refrigerator’s thermistor or temperature sensor has a problem, or there is an issue with temperature sensing.
Repair or Check: Check the thermistor’s wiring and connections. If it appears damaged or faulty, consider replacing it.

Parts Needed: Thermistor (temperature sensor).

Error Code: E3 or “E4”

Error Condition: The refrigerator’s evaporator fan motor has a malfunction or is not working correctly.
Repair or Check: Inspect the evaporator fan motor and its wiring for any defects. If the fan motor is not running or is malfunctioning, it may need replacement.

Parts Needed: Evaporator fan motor.

Error Code: E5 or “E6”

Error Condition: The refrigerator’s defrost system has a fault or is not functioning correctly.
Repair or Check: Check the defrost heater, defrost thermostat, and defrost control board for any issues. A faulty component in the defrost system may require replacement.

Parts Needed: Defrost heater, defrost thermostat, defrost control board.

Error Code: E8 or “EE”

Error Condition: The refrigerator’s display control board has detected a stuck key or button on the control panel.
Repair or Check: Check the control panel buttons for any debris or obstructions that might be causing the error. If necessary, clean the control panel or replace it if the buttons are faulty.

Parts Needed: Control panel.

Error Code: SY, CF, or “Er SY” / “Er CF”

Error Condition: The refrigerator’s evaporator fan has a communication problem.
Repair or Check: Check the wiring and connections between the main control board and the evaporator fan. If there is an issue with communication, it might require replacing the control board or fan motor.

Parts Needed: Main control board, evaporator fan motor.

Error Code: IF, ICE, or “Er IF” / “Er ICE”

Error Condition: The refrigerator’s ice maker is not functioning correctly, or there is an issue with ice maker fan motor.
Repair or Check: Check the ice maker, ice maker fan, and related components for any defects. The ice maker assembly or fan motor might need replacement.

Parts Needed: Ice maker assembly, ice maker fan motor.

LG Appliances have long been recognized for their high-quality and innovative products, designed to enhance the modern household experience. However, like any appliances, even LG products may encounter occasional issues that require professional attention. When it comes to LG appliance repair, Pros Fix Appliance is the name you can trust. In this article, we’ll highlight the importance of professional LG appliance repair and how Pros Fix Appliance excels in efficiently addressing various issues, ensuring your appliances perform optimally.

The Significance of Professional LG Appliance Repair:

Opting for professional repair services for your LG appliances brings forth several advantages, providing efficient repairs and peace of mind:

Expert Diagnosis:

Pros Fix Appliance boasts a team of experienced technicians who specialize in repairing LG appliances. With their extensive knowledge and expertise, they can quickly diagnose and address a wide range of issues related to LG products.

Genuine LG Parts:

Professionals have access to authentic LG replacement parts, ensuring compatibility and reliable repairs. By using genuine components, Pros Fix Appliance guarantees that your appliances maintain their performance and longevity.

Preserving Warranty Coverage:

By choosing authorized service providers like Pros Fix Appliance, you can rest assured that repairs are conducted in line with manufacturer guidelines, preserving your warranty coverage and safeguarding your investment.

Safety Assurance:

LG appliances often incorporate intricate electrical components. Professional repair services prioritize safety, ensuring that repairs adhere to the highest standards, minimizing potential risks and hazards.

Pros Fix Appliances: Your Trusted LG Appliance Repair Partner:

When it comes to LG appliance repair, homeowners rely on Pros Fix Appliance for several reasons:

Expertise and Experience in LG Appliance Repair:

Pros Fix Appliance takes pride in its team of experienced technicians specializing in LG appliance repairs. Their in-depth knowledge and hands-on experience enable them to efficiently diagnose and resolve various LG appliance issues.

Authentic LG Parts:

To maintain the quality and performance of your LG appliances, Pros Fix Appliance exclusively utilizes genuine LG replacement parts. This guarantees long-lasting repairs and ensures your appliances continue to function optimally.

Timely Service:

Pros Fix Appliance understands the inconvenience caused by malfunctioning appliances. They prioritize prompt service and aim to restore your LG appliances’ functionality quickly, minimizing disruptions to your daily routine.

Customer Satisfaction:

Customer satisfaction is paramount to Pros Fix Appliance. Their friendly and professional team is dedicated to addressing your concerns, providing reliable repairs, and ensuring your satisfaction throughout the entire repair process. They strive to make your experience with LG appliance repair a positive one.

Common Issues with LG Appliances:

LG appliances encompass a diverse range of products, including refrigerators, washers, dryers, ovens, dishwashers, and more. Pros Fix Appliance is well-equipped to address common issues such as refrigerator cooling problems, washer not draining, dryer not heating, oven temperature inconsistencies, dishwasher not cleaning properly, and more. With their expertise and specialized knowledge, they can efficiently diagnose and resolve these issues to restore the functionality of your LG appliances.

Trust Pros Fix Appliance for Expert LG Appliance Repair:

When it comes to LG appliance repair, Pros Fix Appliance is your trusted partner. With their expertise, use of genuine LG parts, timely service, and commitment to customer satisfaction, you can be confident that your LG appliances are in capable hands. Contact Premier LG Appliance Service today for expert LG appliance repair services.

Some issues with LG appliances Pros Fix Appliance can address include:

• Refrigerator cooling problems
• Washer not draining
• Dryer not heating
• Oven temperature inconsistencies
• Dishwasher not cleaning properly
• And more.

Refrigerators

Models we repair:

LFX: French Door refrigerators
LSX: Side-by-Side refrigerators
LMX: French Door refrigerators with additional drawers
LTG: Top Freezer refrigerators
LDC: Bottom Freezer refrigerators
LFXC: Counter-Depth French Door refrigerators
LSS: Studio Series Side-by-Side refrigerators
LRFX: Counter-Depth French Door refrigerators with InstaView Door-in-Door feature
LPC: Compact refrigerators
LMWS: Studio Series French Door refrigerators
LRSES: Studio Series Side-by-Side refrigerators with InstaView Door-in-Door feature

Inadequate Cooling

The refrigerator fails to cool properly, resulting in food not staying fresh or chilled as expected. This can be caused by a malfunctioning compressor, a faulty thermostat, blocked air vents, or a damaged evaporator fan.

Excessive Frost Buildup

Frost accumulates in the freezer compartment or on the refrigerator’s evaporator coils, reducing cooling efficiency. This issue may arise due to a faulty defrost system, a damaged door gasket, or a clogged drain

Water Leakage

Water leaks from the refrigerator, causing puddles or moisture buildup. Common causes include a blocked or frozen defrost drain, a cracked water line, a faulty water inlet valve, or improper installation.

Noisy Operation

Unusual noises such as humming, buzzing, or rattling sounds can be disruptive. These noises may be caused by a malfunctioning condenser fan, a faulty compressor, ice buildup in the freezer, or a malfunctioning evaporator fan motor.

Ice Maker Problems

Issues with the built-in ice maker can include a jammed ice maker, inconsistent ice production, ice clumping, or a malfunctioning ice dispenser motor. These issues can be due to a faulty water inlet valve, a defective ice maker assembly, or clogged water lines.

Door Seal Issues

A damaged or worn-out door seal (door gasket) can result in warm air entering the refrigerator, causing temperature fluctuations and increased energy consumption. A proper seal is necessary to maintain optimal cooling efficiency.

Control Board Malfunction

The control board, which manages various functions and settings, can malfunction. This can lead to erratic temperature readings, failure to respond to commands, or a complete loss of functionality.

Dispenser Problems

Issues with the water dispenser or ice dispenser may include slow water flow, inconsistent ice dispensing, or a dispenser that is not working at all. These issues can be caused by a faulty dispenser switch, a malfunctioning water inlet valve, or clogged water lines.

Freezer Defrosting Issues

The freezer may experience problems with defrosting, resulting in excessive frost buildup or inadequate defrosting cycles. This issue can be caused by a malfunctioning defrost heater, defrost thermostat, or defrost control board.

Electrical Problems

LG refrigerators may encounter electrical issues such as tripped circuit breakers, faulty power cords, or issues with the electrical connections within the appliance.

Error Code: Er FF

Error Condition: Freezer fan error
Repair or Check: Check the freezer fan motor for proper operation. Inspect the wiring connections and control board.
Parts Needed: Freezer fan motor, wiring harness, control board

Error Code: Er CF

Error Condition: Condenser fan error
Repair or Check: Verify the condenser fan motor is functioning correctly. Check the wiring connections and control board.
Parts Needed: Condenser fan motor, wiring harness, control board

Error Code: Er CO

Error Condition: Communication error
Repair or Check: Check the wiring connections between the display board and main control board. Ensure proper communication.
Parts Needed: None (Check and repair wiring connections)

Error Code: Er dH

Error Condition: Defrost heater error
Repair or Check: Inspect the defrost heater for any faults. Check the temperature sensor and control board.
Parts Needed: Defrost heater, temperature sensor, control board

Error Code: Er IF

Error Condition: Ice fan error
Repair or Check: Verify the ice fan motor is operating correctly. Inspect the wiring connections and control board.
Parts Needed: Ice fan motor, wiring harness, control board

Error Code: Er FF or Er rF

Error Condition: Fresh food fan error
Repair or Check: Check the fresh food fan motor for proper functioning. Inspect the wiring connections and control board.
Parts Needed: Fresh food fan motor, wiring harness, control board

Error Code: Er HS

Error Condition: Humidity sensor error
Repair or Check: Inspect the humidity sensor for any issues. Check the wiring connections and control board.
Parts Needed: Humidity sensor, wiring harness, control board

Error Code: Er SS

Error Condition: Freezer sensor error
Repair or Check: Check the freezer sensor for proper operation. Inspect the wiring connections and control board.
Parts Needed: Freezer sensor, wiring harness, control board

Error Code: Er rS

Error Condition: Refrigerator sensor error
Repair or Check: Verify the refrigerator sensor is functioning correctly. Check the wiring connections and control board.
Parts Needed: Refrigerator sensor, wiring harness, control board

Freezers

Models we repair:

LFX: Upright Freezers

LFC: Chest Freezers

LBN: Bottom Freezer refrigerators with separate freezer drawers

Temperature Fluctuations

The freezer may fail to maintain a consistent temperature, resulting in food not freezing properly. This can be caused by a malfunctioning thermostat, a faulty temperature sensor, a defective control board, or improper airflow.

Excessive Frost Buildup

Excessive frost accumulation in the freezer can lead to reduced cooling efficiency and limited storage space. This issue may occur due to a faulty defrost heater, a malfunctioning defrost timer or control board, or a damaged door gasket.

Defrosting Problems

The freezer may have difficulty defrosting, resulting in excessive ice buildup or frost. This can be caused by a malfunctioning defrost heater, a defective defrost thermostat, or a faulty defrost control.

Noisy Operation

Unusual noises coming from the freezer, such as loud humming or buzzing sounds, can be disruptive. These noises may be due to a faulty condenser fan motor, a malfunctioning evaporator fan motor, or ice buildup on the fan blades.

Door Seal Issues

A damaged or worn-out door seal (door gasket) can lead to warm air entering the freezer, causing temperature fluctuations and increased energy consumption. Proper sealing is essential for efficient freezing.

Water Leakage

Water leaks inside the freezer can result from a clogged or frozen drain line, a faulty water inlet valve, or improper installation.

Freezer Not Freezing

The freezer may not reach the desired freezing temperature or fail to freeze items properly. This can be caused by a malfunctioning compressor, a refrigerant leak, or an issue with the evaporator coils.

Electrical Problems

LG freezers may encounter electrical issues such as tripped circuit breakers, faulty power cords, or problems with the electrical connections within the appliance.

Control Board Malfunction

The control board, responsible for managing various functions and settings, can malfunction. This can lead to erratic temperature readings, failure to respond to commands, or a complete loss of functionality.

Frost-Free System Failure

In frost-free freezers, the automatic defrost system can experience failures. This can result in excessive ice buildup, limited cooling, or uneven temperature distribution.

Error Code: Er FF

Error Condition: Freezer fan error
Repair or Check: Check the freezer fan motor for proper operation. Inspect the wiring connections and control board.
Parts Needed: Freezer fan motor, wiring harness, control board

Error Code: Er dH

Error Condition: Defrost heater error
Repair or Check: Inspect the defrost heater for any faults. Check the temperature sensor and control board.
Parts Needed: Defrost heater, temperature sensor, control board

Error Code: Er CF

Error Condition: Condenser fan error
Repair or Check: Verify the condenser fan motor is functioning correctly. Check the wiring connections and control board.
Parts Needed: Condenser fan motor, wiring harness, control board

Error Code: Er IF

Error Condition: Ice fan error
Repair or Check: Verify the ice fan motor is operating correctly. Inspect the wiring connections and control board.
Parts Needed: Ice fan motor, wiring harness, control board

Error Code: Er FS

Error Condition: Freezer sensor error
Repair or Check: Check the freezer sensor for proper operation. Inspect the wiring connections and control board.
Parts Needed: Freezer sensor, wiring harness, control board

Error Code: Er rS

Error Condition: Refrigerator sensor error
Repair or Check: Verify the refrigerator sensor is functioning correctly. Check the wiring connections and control board.
Parts Needed: Refrigerator sensor, wiring harness, control board

Error Code: Er dS

Error Condition: Defrost sensor error
Repair or Check: Check the defrost sensor for any issues. Inspect the wiring connections and control board.
Parts Needed: Defrost sensor, wiring harness, control board

Error Code: Er r dH

Error Condition: Refrigerator defrost sensor error
Repair or Check: Inspect the refrigerator defrost sensor for any faults. Check the wiring connections and control board.
Parts Needed: Refrigerator defrost sensor, wiring harness, control board

Error Code: Er CF

Error Condition: Communication failure
Repair or Check: Check the wiring connections between the display board and main control board. Ensure proper communication.
Parts Needed: None (Check and repair wiring connections)

Error Code: Er CO

Error Condition: Communication error
Repair or Check: Verify the communication between the control board and display board. Check the wiring connections.
Parts Needed: None (Check and repair wiring connections)

Washing machines

Models we repair:

WTG: Top Load Washing Machines (Standard Models)

WT-H: Top Load Washing Machines (Higher-End or Premium Models)

WM: Front Load Washing Machines

Not Starting or Powering On

The washing machine fails to start or power on, which can be due to a faulty power cord, a tripped circuit breaker, or a malfunctioning control board.

Noisy Operation

Unusual noises during the wash cycle, such as banging, grinding, or squealing sounds, can be caused by a malfunctioning drum bearing, worn-out belts, or a defective motor.

Not Draining

The washing machine does not drain properly, leaving water in the tub. This can be caused by a clogged drain hose, a faulty drain pump, or an issue with the water level sensor.

Filling or Overfilling Problems

The washing machine may have issues with filling or overfilling. This can be due to a faulty water inlet valve, a malfunctioning water level sensor, or a problem with the pressure switch.

Not Spinning or Agitating

The washing machine fails to spin or agitate during the wash cycle. This can be caused by a broken or worn-out drive belt, a defective motor, or a malfunctioning control board.

Leaking Water

Water leakage can occur from the washing machine, which may be due to a damaged or loose water hose, a faulty door seal, or a malfunctioning water inlet valve.

Error Codes

LG washing machines display error codes to indicate specific problems. Common error codes include issues with door locks, drain pumps, or unbalanced loads. Referring to the user manual can help identify and troubleshoot these error codes.

Unbalanced Loads

The washing machine may struggle to balance the load, resulting in excessive shaking or vibrating. This can be caused by unevenly distributed laundry, a worn-out suspension system, or an issue with the leveling legs.

Foul Odors

Lingering odors can develop in the washing machine, which may be caused by the buildup of dirt, detergent residue, or mold and mildew growth. Regular cleaning and maintenance can help prevent and eliminate these odors.

Display or Control Panel Issues

Problems with the display or control panel can include unresponsive buttons, flickering screens, or error messages. This can be due to a malfunctioning control board or a faulty display panel.

Error Code: OE

Error Condition: Drain pump or drain system issue
Repair or Check: Check for any clogs or obstructions in the drain hose or pump. Ensure the drain pump is functioning properly.
Parts Needed: Drain pump, drain hose, control board

Error Code: UE

Error Condition: Unbalanced load
Repair or Check: Rearrange the clothes to evenly distribute the load. Ensure the machine is level and stable.
Parts Needed: None (Load balancing and leveling)

Error Code: IE

Error Condition: Water inlet issue
Repair or Check: Check the water supply valves for proper operation. Inspect the water inlet hoses and filters.
Parts Needed: Water inlet valve, water inlet hose, control board

Error Code: LE

Error Condition: Motor overload or locked motor
Repair or Check: Check for any obstructions in the drum. Inspect the motor, drive belt, and wiring connections.
Parts Needed: Motor, drive belt, control board

Error Code: PE

Error Condition: Water level sensor issue
Repair or Check: Check the water level sensor and its wiring connections. Verify the water pressure is sufficient.
Parts Needed: Water level sensor, control board

Error Code: DE

Error Condition: Door lock issue
Repair or Check: Check the door lock mechanism for proper operation. Inspect the door latch, wiring, and control board.
Parts Needed: Door lock assembly, door latch, control board

Error Code: FE

Error Condition: Water overflowing or overfilling
Repair or Check: Verify the water inlet valves are functioning correctly. Inspect the pressure switch and its connections.
Parts Needed: Water inlet valve, pressure switch, control board

Error Code: CE

Error Condition: Motor issue or abnormal drum movement
Repair or Check: Check for any obstructions in the drum. Inspect the motor, drive belt, and wiring connections.
Parts Needed: Motor, drive belt, control board

Error Code: UE or E3

Error Condition: Unbalanced load or drum imbalance
Repair or Check: Rearrange the clothes to evenly distribute the load. Ensure the machine is level and stable.
Parts Needed: None (Load balancing and leveling)

Error Code: tE

Error Condition: Heating issue
Repair or Check: Check the heating element, thermistor, and wiring connections. Ensure proper power supply.
Parts Needed: Heating element, thermistor, control board

Dryers

Models we repair:

DLE: Electric Dryers
DLG: Gas Dryers

Not Heating

The dryer fails to produce heat, resulting in clothes not drying properly. This can be caused by a faulty heating element, a malfunctioning thermostat, a broken thermal fuse, or a defective igniter (for gas dryers).

Overheating

The dryer becomes too hot during operation, posing a safety risk. This can be caused by a malfunctioning thermostat, a clogged vent, or a restricted airflow due to lint buildup.

Noisy Operation

Unusual noises during the drying cycle, such as squeaking, thumping, or rattling sounds, can be caused by worn-out drum rollers, a faulty idler pulley, or a damaged blower wheel.

Drum Not Turning

The drum fails to rotate, resulting in clothes not tumbling and drying unevenly. This can be caused by a broken drive belt, a malfunctioning motor, or a defective idler pulley.

Long Drying Times

The dryer takes an excessive amount of time to dry clothes. This can be due to a clogged vent, a restricted airflow, or a malfunctioning thermostat.

Not Shutting Off

The dryer does not shut off at the end of the drying cycle. This can be caused by a malfunctioning timer, a faulty control board, or a defective moisture sensor.

Error Codes

LG dryers display error codes to indicate specific problems. Common error codes may relate to issues with temperature sensors, motor malfunctions, or airflow restrictions. Consult the user manual to understand and troubleshoot these error codes.

Door Issues

Problems with the dryer door can include difficulty closing or latching properly, resulting in the dryer not starting. This can be caused by a damaged door switch or a faulty door latch mechanism.

Electrical Problems

LG dryers may encounter electrical issues such as tripped circuit breakers, faulty power cords, or problems with the electrical connections within the appliance.

Display or Control Panel Issues

Problems with the display or control panel can include unresponsive buttons, flickering screens, or error messages. This can be due to a malfunctioning control board or a faulty display panel.

Some error codes may be:

Error Code: d90 or d95

Error Condition: Blockage in the dryer duct or vent.
Repair or Check: Check the exhaust vent for any obstructions or lint buildup and clear it as needed.
Parts Needed: None (usually caused by a blockage that needs cleaning).

Error Code: dE or dE1

Error Condition: Problem with the dryer door.
Repair or Check: Make sure the door is fully closed and latched. If the error persists, check the door switch or latch mechanism.
Parts Needed: Door switch or latch (if faulty).

Error Code: tE1, tE2, tE3, etc.

Error Condition: Issue with the dryer’s thermistor.
Repair or Check: Check the thermistor for any defects and replace it if necessary.
Parts Needed: Thermistor.

Error Code: HE or HE1

Error Condition: Heating issue in the dryer.
Repair or Check: Check the heating element, thermistor, and thermostat for faults. Ensure proper power supply.
Parts Needed: Heating element, thermistor, thermostat.

Error Code: FE

Error Condition: Problem with the dryer’s power supply.
Repair or Check: Check the power cord and outlet for any issues.
Parts Needed: None (usually related to power supply).

Error Code: LE

Error Condition: Motor error.
Repair or Check: Check the motor and motor’s sensor for faults.
Parts Needed: Motor, motor sensor (if faulty).

Error Code: tS or TS

Error Condition: Problem with the dryer’s thermistor sensor.
Repair or Check: Check the thermistor sensor for any defects and replace if necessary.
Parts Needed: Thermistor sensor.

Error Code: PF or PFE

Error Condition: Power failure during the drying cycle.
Repair or Check: Check the power supply and connections for consistency.
Parts Needed: None (usually related to power supply).

Dishwashers

Models we repair:

LDT: Top Control Dishwashers
LDF: Front Control Dishwashers

Poor Cleaning Results

The dishwasher does not clean dishes effectively, leaving residue or food particles behind. This can be caused by a clogged spray arm, a malfunctioning wash motor, a blocked filter, or improper loading of dishes.

Water Not Draining

The dishwasher fails to drain properly, resulting in standing water in the bottom of the tub. This can be caused by a clogged drain hose, a faulty drain pump, or a blocked garbage disposal.

Leaking Water

Water leaks from the dishwasher during operation, causing puddles on the floor. This can be due to a damaged door gasket, a loose or cracked water supply line, or a faulty inlet valve.

Noisy Operation

Unusual noises during the wash or drain cycle, such as grinding, buzzing, or rattling sounds, can be caused by a malfunctioning wash motor, a worn-out pump motor, or a defective spray arm.

Dishwasher Not Starting

The dishwasher does not start or respond to commands. This can be caused by a faulty door latch or switch, a malfunctioning control board, or a tripped circuit breaker.

Foul Odors

Lingering odors can develop inside the dishwasher, which may be caused by food residue, grease buildup, or mold and mildew growth. Regular cleaning and maintenance can help eliminate these odors.

Dispenser Problems

Issues with the detergent or rinse aid dispenser can include failure to dispense the products properly or leaking. This can be caused by a clogged dispenser, a malfunctioning dispenser motor, or improper loading of the dispenser compartments.

Control Panel Issues

Problems with the control panel can include unresponsive buttons, error codes, or display malfunctions. This can be due to a faulty control board or a defective user interface.

Inadequate Water Filling

The dishwasher may not fill with an adequate amount of water, resulting in insufficient cleaning. This can be caused by a malfunctioning water inlet valve, a clogged inlet screen, or low water pressure.

Error Codes

LG dishwashers may display error codes to indicate specific problems. Common error codes can include issues with water temperature, water level, or drain system. Refer to the user manual for guidance on understanding and troubleshooting these error codes.

Some error codes may be:

Error Code: IE

Error Condition: Water inlet error. The dishwasher is not getting enough water or is not detecting water filling.
Repair or Check: Check the water supply and ensure the water inlet valve is functioning correctly. Clear any blockages in the water inlet.

Parts Needed: Water inlet valve

Error Code: OE

Error Condition: Water not draining properly from the dishwasher.
Repair or Check: Check for clogged or kinked drain hoses, as well as any obstructions in the drain pump or filter.

Parts Needed: Drain pump, drain hose

Error Code: FE

Error Condition: Water overflow error. The dishwasher is detecting a water leak or overflow.
Repair or Check: Check for water leaks around the dishwasher, and inspect the float assembly and float switch for proper operation.

Parts Needed: Float assembly, float switch

Error Code: LE

Error Condition: Motor or circulation pump issue.
Repair or Check: Inspect the motor and circulation pump for faults or blockages. Check the wiring connections.

Parts Needed: Circulation pump, motor

Error Code: PE

Error Condition: Pressure sensor error. The dishwasher is not detecting proper water pressure.
Repair or Check: Check the water pressure in the supply line and ensure the pressure sensor is working correctly.

Parts Needed: Pressure sensor

Error Code: HE

Error Condition: Heater error. There is a problem with the dishwasher’s heating element or the water is not heating properly.
Repair or Check: Check the heating element and related wiring for faults. Make sure the water is reaching the correct temperature.

Parts Needed: Heating element

Error Code: FE

Error Condition: Water not filling up to the proper level.
Repair or Check: Check the water level sensor and wiring connections. Ensure the float is not stuck.

Parts Needed: Water level sensor

Error Code: AE

Error Condition: Leakage error. The dishwasher is detecting water leakage.
Repair or Check: Check for leaks around the dishwasher, door gasket, and tub seals.

Parts Needed: Door gasket, tub seals

Stoves, Ovens, and Ranges

Models we repair:

LRE: Electric Ranges (Free-Standing)
LSG: Gas Ranges (Free-Standing)
LSSE: Slide-In Electric Ranges
LSGL: Slide-In Gas Ranges
LWD: Wall Ovens (Electric)
LDG: Wall Ovens (Gas)
LUTD: Wall Oven Microwave Combo (Electric)
LDTS: Wall Oven Microwave Combo (Gas)

Heating Issues

The stove, oven, or range may fail to heat up properly or maintain consistent temperatures. This can be caused by a faulty heating element, a malfunctioning thermostat, or a defective igniter (for gas stoves/ovens).

Uneven Heating

Uneven heat distribution within the oven can result in food not cooking evenly. This can be caused by a malfunctioning convection fan, a faulty temperature sensor, or improper oven calibration.

Ignition Problems (Gas Models)

Gas stoves, ovens, or ranges may experience issues with ignition. This can manifest as difficulty in lighting the burners or the oven pilot, or continuous clicking sounds without ignition. Common causes include a faulty ignition switch, a dirty burner or igniter, or a malfunctioning gas valve.

Burner Issues

Individual burners on the stove may have problems, such as not lighting, uneven flame distribution, or reduced flame intensity. These issues can be caused by clogged burner ports, a faulty burner valve, or a damaged burner head.

Control Panel Malfunctions

Problems with the control panel can include unresponsive buttons, flickering displays, or error codes. This can be due to a defective control board, a faulty keypad, or loose electrical connections.

Door Seal Problems

A damaged or worn-out door seal (oven gasket) can lead to heat escaping from the oven, resulting in inefficient cooking and increased energy consumption. Proper sealing is crucial for optimal oven performance.

Self-Cleaning Difficulties

Self-cleaning cycles can present challenges, such as the oven not starting the cleaning cycle, the door not locking properly, or the self-cleaning process producing excessive smoke or odors. These issues can be caused by a malfunctioning door latch mechanism, a faulty thermostat, or residual food particles interfering with the process.

Gas Smell

A noticeable gas odor can indicate a gas leak, which requires immediate attention. If you suspect a gas leak, ensure ventilation, turn off the gas supply, and contact a professional appliance repair service or your gas utility provider.

Control Knob Problems

Control knobs on the stove or oven may become loose, hard to turn, or fail to engage with the corresponding settings. This can be caused by worn-out knobs, a damaged knob shaft, or a faulty control valve.

Electrical Problems

Stoves, ovens, or ranges may encounter electrical issues such as tripped circuit breakers, faulty power cords, or problems with the electrical connections within the appliance.

Error Code: F-1

Error Condition: Problem with the oven’s electronic control board or touchpad.
Repair or Check: Check the connections between the control board and touchpad. If the issue persists, you might need to replace one or both components.
Parts Needed: Electronic control board, touchpad.

Error Code: F-3

Error Condition: Oven temperature sensor (thermistor) is faulty or reading incorrectly.
Repair or Check: Check the oven temperature sensor for any defects or disconnections. Replace the sensor if necessary.
Parts Needed: Oven temperature sensor (thermistor).

Error Code: F-9

Error Condition: Oven door lock error. The door lock mechanism is malfunctioning.
Repair or Check: Check the oven door lock assembly and its wiring. If the door lock is faulty, it may need to be replaced.
Parts Needed: Oven door lock assembly.

Error Code: F-10

Error Condition: Runaway temperature. The oven’s temperature is rising too rapidly.
Repair or Check: This error is often related to a stuck relay on the electronic control board or a faulty temperature sensor.
Parts Needed: Electronic control board, oven temperature sensor (thermistor).

Error Code: F-11

Error Condition: Communication error between the oven’s electronic control board and the touchpad.
Repair or Check: Check the wiring connections between the control board and touchpad. Replace either component if faulty.
Parts Needed: Electronic control board, touchpad.

Error Code: F-13

Error Condition: EEPROM communication error. There is a problem with the oven’s memory chip.
Repair or Check: This error may require replacing the electronic control board.
Parts Needed: Electronic control board.

Error Code: F-19

Error Condition: Fan motor error. The cooling fan or convection fan is not working correctly.
Repair or Check: Check the fan motor and its wiring for any issues. Replace the fan motor if needed.
Parts Needed: Fan motor.

Error Code: F-90

Error Condition: Door lock error. The oven door is not locking properly.
Repair or Check: Check the door lock assembly and its wiring. Replace the door lock if necessary.
Parts Needed: Oven door lock assembly.

Kenmore appliances have been a household name for decades, offering a wide range of reliable and innovative products. However, even the most well-designed appliances may encounter issues that require professional repair. When it comes to Kenmore appliance repair, Pros Fix Appliances is the trusted service provider you can rely on. In this article, we will highlight the importance of professional Kenmore appliance repair and how Pros Fix Appliances can efficiently address a wide range of issues, ensuring your appliances are restored to their optimal functionality.

The Significance of Professional Kenmore Appliance Repair:

Choosing professional repair services for your Kenmore appliance repair offers numerous advantages, ensuring efficient repairs and peace of mind:

Expert Diagnosis

Pros Fix Appliances boasts a team of experienced technicians who specialize in repairing Kenmore appliances. Their in-depth knowledge and extensive experience allow them to efficiently diagnose and resolve a wide range of issues related to Kenmore appliances.

Reliable Repairs

Professionals have access to genuine Kenmore replacement parts, ensuring compatibility and reliable repairs. They employ the latest tools and techniques to restore your appliances to optimal functionality.

Warranty Preservation

By opting for authorized service providers like Pros Fix Appliances, you can ensure that repairs are conducted according to manufacturer guidelines, preserving your warranty coverage and protecting your investment.

Safety Assurance

Kenmore appliances involve intricate electrical components. Professional repair services prioritize safety, ensuring repairs are conducted with the highest standards, minimizing risks and potential hazards.

Pros Fix Appliances: Your Trusted Kenmore Appliance Repair Partner:

When it comes to Kenmore appliance repair, Pros Fix Appliances is the go-to service provider for homeowners. Here’s why they choose Pros Fix Appliances:

Expertise and Experience in Kenmore Appliance Repair

Pros Fix Appliances boasts a team of experienced technicians who specialize in repairing Kenmore appliances. Their in-depth knowledge and extensive experience allow them to efficiently diagnose and resolve a wide range of issues.

Genuine Kenmore Parts

To maintain the quality and performance of your Kenmore appliances, Pros Fix Appliances exclusively uses genuine Kenmore replacement parts. This ensures compatibility and guarantees long-lasting repairs.

Timely Service

Pros Fix Appliances understands the inconvenience caused by malfunctioning appliances. They prioritize prompt service and aim to restore the functionality of your Kenmore appliances quickly, minimizing disruption to your daily routine.

Customer Satisfaction

Pros Fix Appliances places a strong emphasis on exceptional customer service. Their friendly and professional team is dedicated to addressing your concerns, providing reliable repairs, and ensuring your satisfaction throughout the entire repair process. They strive to make your experience with Kenmore appliance repair a positive one.

Common Issues with Kenmore Appliances

Kenmore appliances encompass a wide range of products, including refrigerators, washers, dryers, ovens, dishwashers, and more. Pros Fix Appliances is well-equipped to address common issues such as refrigerator cooling problems, washer not spinning, dryer not heating, oven temperature inconsistencies, dishwasher leaks, and more. With their expertise and specialized knowledge, they can efficiently diagnose and resolve these issues to restore the functionality of your Kenmore appliances.

Trust Pros Fix Appliances for Expert Kenmore Appliance Repair.

When it comes to Kenmore appliance repair, Pros Fix Appliances is your trusted partner. With their expertise, genuine Kenmore parts, timely service, and commitment to customer satisfaction, they ensure that your Kenmore appliances are in good hands. Contact Pros Fix Appliances today for expert Kenmore appliance repair services.

Some issues with Kenmore appliances

Kenmore appliance repairs encompass a wide range of products, including refrigerators, washers, dryers, ovens, dishwashers, and more. Here are some common issues that Pros Fix Appliances can address:

Kenmore Refrigerators:

Models we repair:

Kenmore 253

Kenmore 106

Kenmore 363

Kenmore 795

Kenmore 596

Kenmore Elite

Kenmore refrigerator not cooling

This refers to a situation where the refrigerator fails to maintain the desired low temperature, resulting in food not staying adequately chilled.

Excessive frost buildup in Kenmore freezer

This indicates a problem where the freezer compartment accumulates an abnormal amount of frost, which can lead to reduced storage space and hinder the freezer’s cooling efficiency.

Water leakage in Kenmore refrigerator

This describes the presence of water pooling inside or around the refrigerator, suggesting a potential issue with the water supply line, defrost drain, or damaged seals.

Noisy operation in Kenmore refrigerator

This refers to unusual sounds or noises coming from the refrigerator, such as buzzing, rattling, or grinding sounds, which can be indicative of problems with the compressor, fan motor, or other components.

Ice maker not working in Kenmore refrigerator

This indicates that the refrigerator’s built-in ice maker is not producing ice as expected. It could be due to various issues, including problems with the water inlet valve, ice mold, or controls.

Temperature fluctuations in Kenmore refrigerator

This refers to irregular changes in temperature inside the refrigerator, with some areas being colder or warmer than desired, which can affect food preservation.

Kenmore refrigerator not dispensing water/ice

This describes a situation where the refrigerator’s water or ice dispenser is not working properly, such as slow or no water flow, ice not dispensing, or issues with ice crushing or cube selection.

Faulty lights in Kenmore refrigerator

This refers to non-functional interior lights in the refrigerator or lights that flicker, making it difficult to see the contents inside.

Kenmore refrigerator door seal/gasket problems

This indicates issues with the door seals or gaskets of the refrigerator, which can lead to air leaks, decreased cooling efficiency, and potential temperature fluctuations.

Error codes on Kenmore refrigerator

This refers to alphanumeric codes or error messages displayed on the refrigerator’s control panel, indicating specific issues or malfunctions that require attention or troubleshooting.

Some error codes may be:

Kenmore Refrigerator Error Code = Er It

Error Condition = System error inside ice maker

Repair or Check = Self-test ice maker routine

Parts Needed = ice maker assembly

Kenmore Appliance Repair Refrigerator Error Code = er 1F or er If

Error Condition = Main control board lost a feedback signal from the icing fan motor for over 114 seconds

Repair or Check = Fan – located in the rear of the freezer section and supplies cold air for the compartment where the ice maker is located

Parts Needed = The error code can be cleared by removing power from the refrigerator for 5 minutes, then plugging it back in. The code will be cleared, but can come back if the icing fan does not start to run. If the error continues to come back after the power has been reset. There may be ice formed around the fan housing preventing the fan from running. The fan cover can be removed. You can unplug the unit for 24 hours and leave the doors open. This will allow any ice build up to melt and return the unit to proper operation.

Kenmore Refrigerator Appliance Repair Error Code = Er FF

Error Condition = Evaporator fan failed

Repair or Check = Fan motor, control board – wiring harness

Parts Needed = Evaporator fan motor – Power control board – Wiring harness

Kenmore Refrigerator Appliance Repair Error Code = Er FS

Error Condition = Freezer sensor error

Repair or Check = Sensor – wiring – connector problems

Parts Needed = Thermistor (temp sensor) – Wiring harness – Power control board

Kenmore Refrigerator Appliance Repair Error Code = Er rS

Error Condition = Refrigerator sensor error

Repair or Check = Sensor – wiring – connectors

Parts Needed = Thermistor (temp sensor) – Wiring harness – Main power control board

Kenmore Refrigerator Appliance Repair Error Code = F dS

Error Condition = Freezer defrost sensor

Repair or Check = Sensor short – wiring problem

Parts Needed = Controller assembly is a component that has the defrost thermistor (temp sensor) and fuse for the defrost system

Kenmore Refrigerator Appliance Repair Error Code = r dS

Error Condition = Refrigerator defrost sensor

Repair or Check = Sensor short – wiring problem

Parts Needed = Controller assembly is a component that has the defrost thermistor (temp sensor) and fuse for the defrost system

Kenmore Refrigerator Appliance Repair Error Code = Er HS

Error Condition = Humidity sensor

Repair or Check = Sensor short – wiring problem

Parts Needed = Humidity sensor

Kenmore Refrigerator Appliance Repair Error Code = Er IS

Error Condition = Ice maker sensor

Repair or Check = Sensor short – wiring problem

Parts Needed = Complete Ice maker assembly

Kenmore Refrigerator Appliance Repair Error Code = Er SS

Error Condition = Pantry sensor

Repair or Check = The pantry is the deli drawer. Short in sensor or wiring problem.

Parts Needed = Pantry temperature sensor

Kenmore Refrigerator Appliance Repair Error Code = Er rt

Error Condition = Room temperature sensor

Repair or Check = Short in sensor or wiring problem

Parts Needed = Room temperature sensor

Kenmore Refrigerator Appliance Repair  Error Code = Er gF

Error Condition = Flow meter error code

Repair or Check = Water pressure – flow of water

Parts Needed = Flow meter

Kenmore Refrigerator Error Code = F dH

Error Condition = Sensor did not get over 40F in defrost

Repair or Check = Faulty fuse – heater – control board

Parts Needed = Controller assembly – defrost heater – relay on control board

Kenmore Refrigerator Appliance Repair Error Code = r dH

Error Condition = Sensor did not get over 40F

Repair or Check = Faulty fuse – heater – control board

Parts Needed = Controller assembly – defrost heater – relay on control board

Kenmore Refrigerator Appliance Repair Error Code = Er 1F

Error Condition = The fan for the ice compartment failed

Repair or Check = Icing fan blocked – ice fan motor is defective – wiring in the circuit is defective – control board has failed

Parts Needed = Ice fan motor – Wiring harness – Power control board

Kenmore Refrigerator Appliance Repair  Error Code = Er IF

Error Condition = The fan for the ice compartment failed

Repair or Check = Icing fan blocked – ice fan motor is defective – wiring in the circuit is defective – control board has failed

Parts Needed = Ice fan motor – Wiring harness – Power control board

Kenmore Refrigerator Appliance Repair Error Code = Er CF

Error Condition = Condenser fan motor is defective

Repair or Check = Condenser fan motor – wiring – control board

Parts Needed = Condenser fan motor – Power control board – Wiring harness

Kenmore Refrigerator Appliance Repair Error Code = Er CO

Error Condition = Communication error

Repair or Check = Communication error between main board and display board

Parts Needed = Display control board – Power control board – Wiring harness

Kenmore Freezer:

Models we repair:

Kenmore 253

Kenmore 106

Kenmore 363

Kenmore 795

Kenmore 596

Kenmore Elite

Inadequate Freezer Cooling

Insufficient cooling in your Kenmore freezer occurs when the freezer fails to maintain the desired low temperature, resulting in food not staying properly frozen.

Excessive Frost Buildup

Excessive frost accumulation in your Kenmore freezer refers to an abnormal amount of frost forming inside the freezer compartment. This can reduce storage capacity and hinder the freezer’s cooling efficiency.

Defrost System Issues

Problems with the defrost system in your Kenmore freezer can include a faulty defrost timer, defrost heater, or defrost thermostat. These issues can lead to excessive ice buildup and hinder the defrosting process.

Water Leakage in Freezer

Water leakage in your Kenmore freezer indicates the presence of water pooling or leaking inside the freezer or around it. This can be caused by a malfunctioning defrost drain or damaged seals.

Noisy Freezer Operation

Unusual noises coming from your Kenmore freezer, such as buzzing, rattling, or grinding sounds, indicate a problem with components such as the compressor, fan motor, or other moving parts.

Temperature Fluctuations

Temperature fluctuations in your Kenmore freezer refer to irregular changes in temperature inside the freezer, with some areas being colder or warmer than desired. This can affect food preservation.

Damaged Door Seals

Damaged door seals in your Kenmore freezer result in air leaks, allowing warm air to enter the freezer compartment. This can compromise cooling efficiency and contribute to frost buildup.

Freezer Failure to Start or Run

Freezer failure to start or run indicates issues with components such as the control panel, thermostat, or electrical system, preventing the freezer from operating properly.

Ice Maker Malfunctions

Ice maker malfunctions in your Kenmore freezer can include inadequate ice production, failure to eject ice properly, or issues with the water inlet valve that supplies water to the ice maker.

Condensation or Frost on Freezer Exterior

Excessive condensation or frost forming on the exterior surface of your Kenmore freezer indicates potential insulation or seal problems, leading to moisture buildup.

Some error codes may be:

Kenmore Refrigerator Error Code = Er It

Error Condition = System error inside ice maker

Repair or Check = Self-test ice maker routine

Parts Needed = ice maker assembly

Kenmore Appliance Repair Refrigerator Error Code = er 1F or er If

Error Condition = Main control board lost a feedback signal from the icing fan motor for over 114 seconds

Repair or Check = Fan – located in the rear of the freezer section and supplies cold air for the compartment where the ice maker is located

Parts Needed = The error code can be cleared by removing power from the refrigerator for 5 minutes, then plugging it back in. The code will be cleared, but can come back if the icing fan does not start to run. If the error continues to come back after the power has been reset. There may be ice formed around the fan housing preventing the fan from running. The fan cover can be removed. You can unplug the unit for 24 hours and leave the doors open. This will allow any ice build up to melt and return the unit to proper operation.

Kenmore Refrigerator Appliance Repair Error Code = Er FF

Error Condition = Evaporator fan failed

Repair or Check = Fan motor, control board – wiring harness

Parts Needed = Evaporator fan motor – Power control board – Wiring harness

Kenmore Refrigerator Appliance Repair Error Code = Er FS

Error Condition = Freezer sensor error

Repair or Check = Sensor – wiring – connector problems

Parts Needed = Thermistor (temp sensor) – Wiring harness – Power control board

Kenmore Refrigerator Appliance Repair Error Code = Er rS

Error Condition = Refrigerator sensor error

Repair or Check = Sensor – wiring – connectors

Parts Needed = Thermistor (temp sensor) – Wiring harness – Main power control board

Kenmore Refrigerator Appliance Repair Error Code = F dS

Error Condition = Freezer defrost sensor

Repair or Check = Sensor short – wiring problem

Parts Needed = Controller assembly is a component that has the defrost thermistor (temp sensor) and fuse for the defrost system

Kenmore Refrigerator Appliance Repair Error Code = r dS

Error Condition = Refrigerator defrost sensor

Repair or Check = Sensor short – wiring problem

Parts Needed = Controller assembly is a component that has the defrost thermistor (temp sensor) and fuse for the defrost system

Kenmore Refrigerator Appliance Repair Error Code = Er HS

Error Condition = Humidity sensor

Repair or Check = Sensor short – wiring problem

Parts Needed = Humidity sensor

Kenmore Refrigerator Appliance Repair Error Code = Er IS

Error Condition = Ice maker sensor

Repair or Check = Sensor short – wiring problem

Parts Needed = Complete Ice maker assembly

Kenmore Refrigerator Appliance Repair Error Code = Er SS

Error Condition = Pantry sensor

Repair or Check = The pantry is the deli drawer. Short in sensor or wiring problem.

Parts Needed = Pantry temperature sensor

Kenmore Refrigerator Appliance Repair Error Code = Er rt

Error Condition = Room temperature sensor

Repair or Check = Short in sensor or wiring problem

Parts Needed = Room temperature sensor

Kenmore Refrigerator Appliance Repair  Error Code = Er gF

Error Condition = Flow meter error code

Repair or Check = Water pressure – flow of water

Parts Needed = Flow meter

Kenmore Refrigerator Error Code = F dH

Error Condition = Sensor did not get over 40F in defrost

Repair or Check = Faulty fuse – heater – control board

Parts Needed = Controller assembly – defrost heater – relay on control board

Kenmore Refrigerator Appliance Repair Error Code = r dH

Error Condition = Sensor did not get over 40F

Repair or Check = Faulty fuse – heater – control board

Parts Needed = Controller assembly – defrost heater – relay on control board

Kenmore Refrigerator Appliance Repair Error Code = Er 1F

Error Condition = The fan for the ice compartment failed

Repair or Check = Icing fan blocked – ice fan motor is defective – wiring in the circuit is defective – control board has failed

Parts Needed = Ice fan motor – Wiring harness – Power control board

Kenmore Refrigerator Appliance Repair  Error Code = Er IF

Error Condition = The fan for the ice compartment failed

Repair or Check = Icing fan blocked – ice fan motor is defective – wiring in the circuit is defective – control board has failed

Parts Needed = Ice fan motor – Wiring harness – Power control board

Kenmore Refrigerator Appliance Repair Error Code = Er CF

Error Condition = Condenser fan motor is defective

Repair or Check = Condenser fan motor – wiring – control board

Parts Needed = Condenser fan motor – Power control board – Wiring harness

Kenmore Refrigerator Appliance Repair Error Code = Er CO

Error Condition = Communication error

Repair or Check = Communication error between main board and display board

Parts Needed = Display control board – Power control board – Wiring harness

Kenmore Washers:

Models we repair

Washer Not Turning On

The washer fails to start when the power button is pressed, indicating potential issues with the power supply, control panel, or door latch.

Washer Not Draining

The washer does not properly drain water after a cycle, which can be caused by a clogged drain hose, a malfunctioning drain pump, or a faulty pressure switch.

Washer Not Spinning

The washer fails to spin the clothes during a cycle, suggesting problems with the drive belt, motor coupling, or lid switch.

Excessive Vibration or Shaking

The washer vibrates or shakes excessively during operation, indicating possible issues with the leveling feet, shock absorbers, or load balance.

Leaking Water

Water leakage from the washer can occur due to damaged hoses, a worn-out door seal, or a faulty water inlet valve.

Agitator Not Working

The agitator, which moves the clothes in the washer, may stop functioning due to a broken agitator dogs or a malfunctioning agitator motor.

Loud or Unusual Noises

Unusual noises such as grinding, squeaking, or banging sounds during the wash cycle can be caused by a worn-out belt, faulty bearings, or loose components.

Error Codes on Display

The washer displays error codes that indicate specific issues, such as unbalanced load, water pressure problems, or sensor malfunctions.

Dispenser Issues

The detergent or fabric softener dispenser may not dispense properly, potentially due to clogged or faulty dispenser mechanisms.

Foul Odors

Lingering or unpleasant odors in the washer can be caused by the growth of mold, mildew, or bacteria, often due to insufficient cleaning or improper ventilation.

Kenmore Dryers:

Dryer Not Turning On

This issue can occur due to a tripped circuit breaker, power supply problems, a faulty start switch, or a broken door switch.

No Heat or Insufficient Heat

Potential causes include a faulty heating element, a malfunctioning thermostat, a broken thermal fuse, or a defective igniter (for gas dryers).

Overheating

Overheating can result from a blocked or clogged vent, a malfunctioning thermostat, a faulty heating element, or a restricted airflow due to lint buildup.

Drum Not Spinning

A drum that doesn’t spin may indicate a broken belt, a faulty motor, a defective belt switch, or a worn-out drum roller.

Excessive Noise

Unusual noises can be caused by worn-out drum rollers, faulty bearings, a damaged belt, or a malfunctioning motor.

Clothes Taking Too Long to Dry

Possible reasons include a clogged vent, improper ventilation, a malfunctioning thermostat, or a damaged heating element.

Dryer Not Shutting Off

This issue can occur due to a faulty timer, a broken cycling thermostat, or a malfunctioning moisture sensor (for sensor-equipped dryers).

Burning Smell

A burning smell may indicate an overheating dryer, a lint buildup near the heating element, or a faulty motor or wiring.

Dryer Not Tumbling

This problem can be caused by a broken drive belt, a faulty motor, a malfunctioning idler pulley, or a defective door switch.

Error Codes on Display

Error codes on the dryer’s display can indicate specific issues, such as a blocked vent, sensor malfunctions, or control board faults.

Kenmore Elite Dryer Error Code = PF
Error Condition = Power Failure
Check or Repair Needed = Power failure while the dryer was in cycle. Press the Stop button to clear the display. If you experience common power failures on your dryer be sure to check the electrical outlet cord.
Replacement Parts = Outlet Cord

Kenmore Elite Dryer Error Code = F01
Error Condition = Main Electronic Control Board Fail
Check or Repair Needed = Remove the dryer from power for 10 minutes. Apply power back to the dryer and if the code returns you need to replace the main electronic control board.
Replacement Parts = Main Electronic Control Board

Kenmore Elite Dryer Error Code = F02
Error Condition = Keypad or User Interface Fail
Check or Repair Needed = A button on the keypad may be stuck on one of the user interface controls. If the button cannot be unstuck then replace the user interface control assembly.
Replacement Parts = User Interface Control Assembly

Kenmore Elite Dryer Error Code = F20
Error Condition = Heater Relay Fail
Check or Repair Needed = The heater relay on the main electronic control board has failed. Remove power to the dryer and replace the main electronic control board.
Replacement Parts = Main Electronic Control Board

Kenmore Elite Dryer Error Code = F22
Error Condition = Outlet Thermistor (Temp Sensor) Fail
Check or Repair Needed = The controller indicates an electrically open outlet temperature sensor (thermistor). Remove power from the dryer. Use a multi-meter and check the resistance of that particular thermistor/temp sensor (10,000 ohms). If the outlet temperature sensor is bad then replace it.
Replacement Parts = Outlet Thermistor (Temp Sensor)

Kenmore Elite Dryer Error Code = F23
Error Condition = Outlet Thermistor (Temp Sensor) Fail
Check or Repair Needed = The controller indicates an electrically open outlet temperature sensor (thermistor). Remove power from the dryer. Use a multi-meter and check the resistance of that particular thermistor/temp sensor (10,000 ohms). If the outlet temperature sensor is bad then replace it.
Replacement Parts = Outlet Thermistor (Temp Sensor)

Kenmore Elite Dryer Error Code = F24
Error Condition = Inlet Thermistor (Temp Sensor) Fail
Check or Repair Needed = The controller indicates an electrically open inlet temperature sensor (thermistor). Remove power from the dryer. Use a multi-meter and check the resistance of that particular thermistor/temp sensor (50,000 ohms). If the inlet temperature sensor is bad then replace it.
NOTE: The inlet thermistor is part of the high limit thermostat on this dryer.
Replacement Parts = High Limit Thermostat – Inlet Thermistor (Temp Sensor)

Kenmore Elite Dryer Error Code = F25
Error Condition = Inlet Thermistor (Temp Sensor) Fail
Check or Repair Needed = The controller indicates an electrical shorted inlet temperature sensor (thermistor). Remove power from the dryer. Use a multi-meter and check the resistance of that particular thermistor/temp sensor (50,000 ohms). If the inlet temperature sensor is bad then replace it.
NOTE: The inlet thermistor is part of the high limit thermostat on this dryer.
Replacement Parts = High Limit Thermostat – Inlet Thermistor (Temp Sensor)

Kenmore Elite Dryer Error Code = F28
Error Condition = Moisture Sensor Fail
Check or Repair Needed = Remove power from the dryer. Check the wiring harness on the moisture sensor visually and with a multi-meter. If the wiring connections are okay then replace the moisture sensor.
Replacement Parts = Moisture Sensor

Kenmore Elite Dryer Error Code = F29
Error Condition = Moisture Sensor Fail
Check or Repair Needed = Remove power from the dryer. Check the wiring harness on the moisture sensor visually and with a multi-meter. If the wiring connections are okay then replace the moisture sensor.
Replacement Parts = Moisture Sensor

Kenmore Elite Dryer Error Code = F30
Error Condition = Restricted Outlet Airflow
Check or Repair Needed = Check the lint screen filter and clean of any lint. Remove fabric softener buildup on the lint screen if necessary. Clear lint blockage restriction from the air vent exhaust system.

Kenmore Elite Dryer Error Code = F31

Error Condition = Low L2 Voltage
Check or Repair Needed = The L2 leg of the 240 volt power is below 30 volts. Check circuit breakers for the dryer and reset the L2 breaker if needed. Remove power to the dryer then check the power cord wire connections on the terminal. If any loose wires are found resecure them. Replace the power cord if it has become damaged. Check the 240 volt power supply to the dryer.
Replacement Parts = Electrical Power Cord

Kenmore Elite Dryer Error Code = F70 F71
Error Condition = No communication between the ECB (electronic control board) and the UICB (user interface control board assembly)
Check or Repair Needed = Remove power from the dryer. Check the wire harnesses visually and with a multi-meter from the electronic control board and the user interface control board. If the connections are okay then the main electronic control board and the user interface control assemblies may need to be replaced.
Replacement Parts = Main Electronic Control Board – User Interface Control

Kenmore Elite Dryer Error Code = F72 – F78
Error Condition = User Interface Control Assembly Fail
Check or Repair Needed = Remove power from the dryer. Check the wire harness connections between the user interface assemblies visually and with a multi-meter. Check the wire harness connections between the main electronic control board and the user interface assemblies visually and with a multi-meter. If the wiring connections are okay then one or both of the user interface control assemblies may need to be replaced.
Replacement Parts = User Interface Control Assembly

Kenmore Oven, Ranges, & Cooktops:

Models we repair:

Oven Not Heating

This issue can be caused by a faulty heating element, a malfunctioning oven igniter (for gas ovens), a broken thermostat, or a defective control board.

Uneven Cooking or Baking

Uneven cooking or baking can result from temperature calibration issues, a malfunctioning oven sensor, or improper placement of racks.

Gas Burner Not Igniting

A gas burner that fails to ignite may indicate a faulty spark igniter, a clogged burner port, a defective gas valve, or a malfunctioning ignition switch.

Electric Burner Not Heating

This problem can occur due to a damaged or burnt-out burner element, a faulty infinite switch, a broken connection, or a defective control board.

Oven Door Not Closing Properly

A door that doesn’t close properly can be caused by a worn-out door gasket, a faulty door hinge, a misaligned door, or a defective door latch.

Self-Cleaning Cycle Issues

Problems with the self-cleaning cycle can arise from a malfunctioning door latch, a faulty temperature sensor, or a defective control board.

Control Panel Not Responding

A control panel that doesn’t respond may indicate a faulty control board, a loose or damaged wire connection, or a malfunctioning touchpad.

Gas Smell

The presence of a gas smell may indicate a gas leak, which requires immediate attention. This could be due to a faulty gas valve, a damaged gas line, or an improper installation.

Error Codes on Display

Error codes on the oven range or cooktop display can indicate specific issues, such as sensor malfunctions, temperature calibration problems, or control board faults.

Excessive Heat or Overheating

Excessive heat or overheating can be caused by a malfunctioning thermostat, a faulty temperature sensor, or a blocked vent or air intake.

Conclusion:

When it comes to Kenmore appliance repair, Pros Fix Appliances is your trusted partner. Their expertise, commitment to quality repairs, and exceptional customer service make them the ideal choice for maintaining the performance and longevity of your valuable Kenmore appliances. Don’t let appliance malfunctions disrupt your daily routine; contact Pros Fix Appliances today and experience the expertise of professional Kenmore appliance repair. To receive service today, call us now at 818-934-3314.